欧洲垃圾桶的标准.doc

The marking consists of a solid bar, the height of which equals h and the width of which equals . the height(h) of the bar shall be the greater of or 1mm. The bar shall only be used in conjunction with the crossed-out wheeled bin. The bar shall not contain any text or any kind of additional information.
The dimensional relationship shown in the picture blow shall be maintained.
When using the marking in the picture modifications caused by production limitations and variations (. modifying of the line thickness, rounding of corners, matching of lines) are permetted provided
  the visual appearance is maintained.
In the absence of relevant product standards or if the relevant product standard does not include marking durability requirements, the following shall apply:
Compliance is checked by inspection and by rubbing by hand for 15s with a piece of cloth soaked with water and again for 15s with a piece of cloth soaked with petroleum spirit.
After this test, the marking shall be legible, it shall not be easily possible to remove the marking. If used, marking plates or labels shall show no curling.
Note: The petroleum spirit to be used for the test is aliphatic solvent hexane having a maximum aromatics content % by volume, a kauri-butanol value of 29, an initial boiling point of approximately 65℃, a dry point of approximately 69℃ and a specific mass of approx