摄像头底座模具设计 摘要:在综合分析塑件结构,使用要求,成型质量和模具制造成本的基础上,介绍结构简单,形状规则的塑件成型。采用侧浇口进料单分型顶杆顶出机构,使塑件能一次成型。设计了相应的冷却水路的注射模,并介绍了模具的工作过程。 关键词:注射模顶杆顶出机构 The design of the Camera base injection mold Abstract Based on prehensive analysis on the plastic part’s strcture service require-ment, moulding quality and mouding quality and mould manu facturing cost. Acorresponding injection mould of internal side core pulling was adopting the mulit-direction and bination core-pulling .acorresponding injection mould of interal side core pulling was designed,the working process of the mould was in-troduced. Keywords Injection mould Medialcoe pulling.